محصولات پارافین واکس

Download Semi Refined Paraffin Wax Msds File

1 . IDENTIFICATION: PRODUCT IDENTIFIER AND CHEMICAL IDENTITY

Product Name: PARAFFIN WAX AND HYDROCARBON WAXES – FULLY REFINED AND/OR SEMI

REFINED

Recommended Use of the Chemical and Restriction on Use:

Candle making, crayons,water proofing agent in textile and MDF industries, electrical insulator, coating agent, production of adhesives etc.

Details of Manufacturer or Importer:

Palayesh Paraffin Khavaran Co.

West 3rd Floor, No 251, Shahid Beheshti Avenue

Abbas Abad, Tehran-Iran

Phone Number: +98 910 145 0130

Emergency telephone number: +98 21 88500600

2 . HAZARDS IDENTIFICATION

Hazardous Nature: The substance is not classified according to the Globally Harmonized System (GHS).

Label Elements

Signal Word Void

Hazard Statements Void

3 . COMPOSITION AND INFORMATION ON INGREDIENTS

Chemical Characterisation: Substances

CAS No. Description

8002-74-2 Paraffin waxes and Hydrocarbon waxes

4 . FIRST AID MEASURES

Inhalation:

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention if breathing problems develop.

Skin Contact:

In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and soap. Seek medical attention if symptoms occur.

Eye Contact:

In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention.

Ingestion:

First aid is not normally required if a small amount of solid materialis swallowed. If molten material is swallowed seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.

Information for Doctor Symptoms Caused by Exposure:

Inhalation: Vapours emitted from molten wax may cause respiratory irritation. Skin contact: Direct contact with molten material may cause thermal burns.

Eye contact: Direct contact with molten material may cause thermal burns. Vapors from molten wax may cause watering of the eyes.

Ingestion: Ingestion of molten material may cause thermal burns. Ingestion of large quantities will produce a laxative effect and may be irritating to the digestive tract.

Product Name: PARAFFIN WAX AND HYDROCARBON WAXES – FULLY REFINED AND/OR SEMI REFINED

5 . FIRE FIGHTING MEASURES

Suitable Extinguishing Media: Foam, dry chemical, carbon dioxide, sand and water fog.

Specific Hazards Arising from the Chemical:

This material may burn but will not ignite readily.

Hazardous combustion products include oxides of carbon and small amounts of oxides of sulphur and nitrogen.

Special Protective Equipment and Precautions for Fire Fighters:

Wear Safe Work Australia approved self-contained breathing apparatus and full protective clothing.

6 . ACCIDENTAL RELEASE MEASURES

Personal Precautions, Protective Equipment and Emergency Procedures:

Wear Safe Work Australia approved respiratory protection and full protective clothing. Evacuate all non-essential personnel from affected area. Do not breathe vapours. Ensure adequate ventilation. Extinguish all sources of ignition. Avoid sparks and open flames. No smoking.

Environmental Precautions:

In the event of a major spill, prevent spillage from entering drains or water courses.

Methods and Materials for Containment and Cleaning Up:

Sweep up and place in a suitable container for subsequent disposal. Do not generate dust. Provide adequate ventilation.

7 . HANDLING AND STORAGE

Precautions for Safe Handling:

Use of safe work practices are recommended to avoid eye or skin contact and inhalation of dust /vapours. Food, beverages and tobacco products should not be stored or consumed where this material is in use. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide eyewash fountains and safety showers in close proximity to points of potential exposure.

Conditions for Safe Storage:

Store in a cool, dry and well ventilated area. Keep container tightly closed when not in use. Protect from heat, sparks, open flames and other sources of ignition. Keep away from strong oxidising agents.

8 . EXPOSURE CONTROLS AND PERSONAL PROTECTION

Exposure Standards:

8002-74-2 Paraffin waxes and Hydrocarbon waxes

NES TWA: 2 mg/m³

Engineering Controls: Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapour below occupational exposure standards.

Personal Protective Equipment (PPE):

Respiratory Protection:

No respiratory protection is required when working with the solid material. If airborne concentrations of wax fumes generated from molten wax, are expected, a Safe Work Australia approved air purifying respirator with a dust/mist/fume filter may be used. See Australian Standards AS/NZS 1715 and 1716 for more information.

Product Name: PARAFFIN WAX AND HYDROCARBON WAXES – FULLY REFINED AND/OR SEMI REFINED

Skin Protection:

Not normally required for solid material. The use of thermally resistant gloves and protective clothing is recommended when there is potential for exposure to molten wax. See Australian Standards AS/NZS 2161, 2210.1 and 2210.2 for more information.

Eye and Face Protection: Safety glasses with top and side shields or goggles. See Australian Standards AS/NZS 1336 and 1337 for more information.

9 . PHYSICAL AND CHEMICAL PROPERTIES

Appearance:

Form: Solid – slab or pastille

Colour: White Transparent, grey or yellow

Odour: None – Characteristic waxy odour

Odour Threshold: Not determined.

pH-Value: Not applicable.

Melting point/Melting range: 50-68 °C

Oil Content/ Oil Content Range: From 0.5% to 30% oil content

Flash Point: Above 280 °C

Flammability: This material may burn but will not ignite readily.

Auto-ignition Temperature: >300 °C

Decomposition Temperature: No information available

Explosion Limits:

Lower: Not determined

Upper: Not determined

Vapour Pressure: Not applicable.

Bulk Density: No information available

Relative Density at 20 °C: 0.80-0.9 g/cm³

Vapour Density: Not applicable.

Evaporation Rate: Not applicable.

Solubility in Water: Insoluble

10 . STABILITY AND REACTIVITY

Possibility of Hazardous Reactions: Hazardous polymerisation will not occur. Chemical Stability: Stable at ambient temperature and under normal conditions of use. Conditions to Avoid: Heat, sparks, open flames, hot surfaces and direct sunlight.

Incompatible Materials: Strong oxidising agents.

Hazardous Decomposition Products: Oxides of carbon and small amounts of amounts of oxides of sulphur and nitrogen.

11 . TOXICOLOGICAL INFORMATION

Toxicity:

LD₅₀/LC₅₀ Values Relevant for Classification: 8002-74-2 Paraffin waxes and Hydrocarbon waxes

Oral LD50 >5000 mg/kg (rat)

Dermal LD50 >2000 mg/kg (rabbit)

Product Name: PARAFFIN WAX AND HYDROCARBON WAXES – FULLY REFINED AND/OR SEMI REFINED

Acute Health Effects

Inhalation: Vapours emitted from molten wax may cause respiratory irritation.

Skin: Direct contact with molten material may cause thermal burns.

Eye: Direct contact with molten material may cause thermal burns. Vapors from molten wax may cause watering of the eyes.

Ingestion:

Ingestion of large quantities will produce a laxative effect and may be irritating to the digestive tract.

Skin Corrosion / Irritation: Based on classification principles, the classification criteria are not met.

Serious Eye Damage / Irritation: Based on classification principles, the classification criteria are not met.

Respiratory or Skin Sensitisation: No sensitising effects known.

Germ Cell Mutagenicity: Based on classification principles, the classification criteria are not met.

Carcinogenicity: This product does NOT contain any IARC listed chemicals.

Reproductive Toxicity: Based on classification principles, the classification criteria are not met.

Specific Target Organ Toxicity (STOT) – Single Exposure: Based on classification principles, the classification criteria are not met.

Specific Target Organ Toxicity (STOT) – Repeated Exposure: Based on classification principles, the classification criteria are not met.

Aspiration Hazard: Based on classification principles, the classification criteria are not met.

Chronic Health Effects: No information available

Existing Conditions Aggravated by Exposure: No information available

Additional toxicological information:

When used and handled according to specifications, the product does not have any harmful effects to our experience and the information provided to us.

12 . ECOLOGICAL INFORMATION

Ecotoxicity: No information available

Aquatic toxicity: No information available

Persistence and Degradability: No information available

Bioaccumulative Potential: No information available

Mobility in Soil: No information available

13 . DISPOSAL CONSIDERATIONS

Disposal Methods and Containers: Dispose according to applicable local and state government regulations.

Special Precautions for Landfill or Incineration:

Please consult your state Land Waste Management Authority for more information.

14 . TRANSPORT INFORMATION

UN Number Not regulated

IMDG, IATA Void

Proper Shipping Name Not regulated

IMDG, IATA Void

Product Name: PARAFFIN WAX AND HYDROCARBON WAXES – FULLY REFINED AND/OR SEMI REFINED

Dangerous Goods Class Not regulated

IMDG Class: Void

Packing Group: Not regulated

IMDG, IATA Void

Marine pollutant: No

15 . REGULATORY INFORMATION

Australian Inventory of Chemical Substances:

8002-74-2 Paraffin waxes and Hydrocarbon waxes

16 . OTHER INFORMATION

Abbreviations and acronyms:

GHS: Globally Harmonized System of Classification and Labelling of Chemicals

CAS: Chemical Abstracts Service (division of the American Chemical Society)

LC50: Lethal concentration, 50 percent

LD50: Lethal dose, 50 percent

IARC: International Agency for Research on Cancer

STEL: Short Term Exposure Limit

TWA: Time Weighted Average

NES: National Exposure Standard

PARAFFIN WAX MAX 1% OIL CONTENT #56-58-melting-point

PARAFFIN WAX MAX 1% OIL CONTENT #58-60-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 1% OIL CONTENT #60-62-melting-point

PARAFFIN WAX MAX 1% OIL CONTENT

PARAFFIN WAX MAX 1.5% OIL CONTENT #56-58-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 1.5% OIL CONTENT

PARAFFIN WAX MAX 1.5% OIL CONTENT #58-60-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 1.5% OIL CONTENT

PARAFFIN WAX MAX 1.5% OIL CONTENT #60-62-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 1.5% OIL CONTENT

PARAFFIN WAX MAX 2.5% OIL CONTENT #56-58-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 2.5% OIL CONTENT

PARAFFIN WAX MAX 2.5% OIL CONTENT #58-60-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 2.5% OIL CONTENT

PARAFFIN WAX MAX 2.5% OIL CONTENT #60-62-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 2.5% OIL CONTENT

PARAFFIN WAX MAX 5% OIL CONTENT #56-58-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 5% OIL CONTENT

PARAFFIN WAX MAX 5% OIL CONTENT #58-60-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 5% OIL CONTENT

PARAFFIN WAX MAX 5% OIL CONTENT #60-62-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 5% OIL CONTENT

PARAFFIN WAX MAX 7% OIL CONTENT #56-58-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 7% OIL CONTENT

PARAFFIN WAX MAX 7% OIL CONTENT #58-60-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 7% OIL CONTENT

PARAFFIN WAX MAX 7% OIL CONTENT #60-62-melting-point

DOWNLOAD ANALYSIS PARAFFIN WAX MAX 7% OIL CONTENT