bright stock slack wax

In the process of producing lubricants and/or base oils the byproduct of this process called Slack Wax. Slack waxes are mixture of oil and wax and depend on the origin of the material it may contain up to 40% oil content. Slack Wax are waxes, materials which have changing properties such as having solid state at room temperature while liquefying at higher temperatures. Slack Wax from different refinery has different properties, and the important specifications are color, oil content and drop melting point.

SKU: 1825 Category:

  • Msds

    1 . IDENTIFICATION: PRODUCT IDENTIFIER AND CHEMICAL IDENTITY

    Product Name: PARAFFIN WAX AND HYDROCARBON WAXES – FULLY REFINED AND/OR SEMI

    REFINED

    Recommended Use of the Chemical and Restriction on Use:

    Candle making, crayons,water proofing agent in textile and MDF industries, electrical insulator, coating agent, production of adhesives etc.

    Details of Manufacturer or Importer:

    Palayesh Paraffin Khavaran Co.

    West 3rd Floor, No 251, Shahid Beheshti Avenue

    Abbas Abad, Tehran-Iran

    Phone Number: +98 910 145 0130

    Emergency telephone number: +98 21 88500600

    2 . HAZARDS IDENTIFICATION

    Hazardous Nature: The substance is not classified according to the Globally Harmonized System (GHS).

    Label Elements

    Signal Word Void

    Hazard Statements Void

    3 . COMPOSITION AND INFORMATION ON INGREDIENTS

    Chemical Characterisation: Substances

    CAS No. Description

    8002-74-2 Paraffin waxes and Hydrocarbon waxes

    4 . FIRST AID MEASURES

    Inhalation:

    If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention if breathing problems develop.

    Skin Contact:

    In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and soap. Seek medical attention if symptoms occur.

    Eye Contact:

    In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention.

    Ingestion:

    First aid is not normally required if a small amount of solid materialis swallowed. If molten material is swallowed seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.

    Information for Doctor Symptoms Caused by Exposure:

    Inhalation: Vapours emitted from molten wax may cause respiratory irritation. Skin contact: Direct contact with molten material may cause thermal burns.

    Eye contact: Direct contact with molten material may cause thermal burns. Vapors from molten wax may cause watering of the eyes.

    Ingestion: Ingestion of molten material may cause thermal burns. Ingestion of large quantities will produce a laxative effect and may be irritating to the digestive tract.

    Product Name: PARAFFIN WAX AND HYDROCARBON WAXES – FULLY REFINED AND/OR SEMI REFINED

    5 . FIRE FIGHTING MEASURES

    Suitable Extinguishing Media: Foam, dry chemical, carbon dioxide, sand and water fog.

    Specific Hazards Arising from the Chemical:

    This material may burn but will not ignite readily.

    Hazardous combustion products include oxides of carbon and small amounts of oxides of sulphur and nitrogen.

    Special Protective Equipment and Precautions for Fire Fighters:

    Wear Safe Work Australia approved self-contained breathing apparatus and full protective clothing.

    6 . ACCIDENTAL RELEASE MEASURES

    Personal Precautions, Protective Equipment and Emergency Procedures:

    Wear Safe Work Australia approved respiratory protection and full protective clothing. Evacuate all non-essential personnel from affected area. Do not breathe vapours. Ensure adequate ventilation. Extinguish all sources of ignition. Avoid sparks and open flames. No smoking.

    Environmental Precautions:

    In the event of a major spill, prevent spillage from entering drains or water courses.

    Methods and Materials for Containment and Cleaning Up:

    Sweep up and place in a suitable container for subsequent disposal. Do not generate dust. Provide adequate ventilation.

    7 . HANDLING AND STORAGE

    Precautions for Safe Handling:

    Use of safe work practices are recommended to avoid eye or skin contact and inhalation of dust /vapours. Food, beverages and tobacco products should not be stored or consumed where this material is in use. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide eyewash fountains and safety showers in close proximity to points of potential exposure.

    Conditions for Safe Storage:

    Store in a cool, dry and well ventilated area. Keep container tightly closed when not in use. Protect from heat, sparks, open flames and other sources of ignition. Keep away from strong oxidising agents.

    8 . EXPOSURE CONTROLS AND PERSONAL PROTECTION

    Exposure Standards:

    8002-74-2 Paraffin waxes and Hydrocarbon waxes

    NES TWA: 2 mg/m³

    Engineering Controls: Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapour below occupational exposure standards.

    Personal Protective Equipment (PPE):

    Respiratory Protection:

    No respiratory protection is required when working with the solid material. If airborne concentrations of wax fumes generated from molten wax, are expected, a Safe Work Australia approved air purifying respirator with a dust/mist/fume filter may be used. See Australian Standards AS/NZS 1715 and 1716 for more information.

    Product Name: PARAFFIN WAX AND HYDROCARBON WAXES – FULLY REFINED AND/OR SEMI REFINED

    Skin Protection:

    Not normally required for solid material. The use of thermally resistant gloves and protective clothing is recommended when there is potential for exposure to molten wax. See Australian Standards AS/NZS 2161, 2210.1 and 2210.2 for more information.

    Eye and Face Protection: Safety glasses with top and side shields or goggles. See Australian Standards AS/NZS 1336 and 1337 for more information.

    9 . PHYSICAL AND CHEMICAL PROPERTIES

    Appearance:

    Form: Solid – slab or pastille

    Colour: White Transparent, grey or yellow

    Odour: None – Characteristic waxy odour

    Odour Threshold: Not determined.

    pH-Value: Not applicable.

    Melting point/Melting range: 50-68 °C

    Oil Content/ Oil Content Range: From 0.5% to 30% oil content

    Flash Point: Above 280 °C

    Flammability: This material may burn but will not ignite readily.

    Auto-ignition Temperature: >300 °C

    Decomposition Temperature: No information available

    Explosion Limits:

    Lower: Not determined

    Upper: Not determined

    Vapour Pressure: Not applicable.

    Bulk Density: No information available

    Relative Density at 20 °C: 0.80-0.9 g/cm³

    Vapour Density: Not applicable.

    Evaporation Rate: Not applicable.

    Solubility in Water: Insoluble

    10 . STABILITY AND REACTIVITY

    Possibility of Hazardous Reactions: Hazardous polymerisation will not occur. Chemical Stability: Stable at ambient temperature and under normal conditions of use. Conditions to Avoid: Heat, sparks, open flames, hot surfaces and direct sunlight.

    Incompatible Materials: Strong oxidising agents.

    Hazardous Decomposition Products: Oxides of carbon and small amounts of amounts of oxides of sulphur and nitrogen.

    11 . TOXICOLOGICAL INFORMATION

    Toxicity:

    LD₅₀/LC₅₀ Values Relevant for Classification: 8002-74-2 Paraffin waxes and Hydrocarbon waxes

    Oral LD50 >5000 mg/kg (rat)

    Dermal LD50 >2000 mg/kg (rabbit)

    Product Name: PARAFFIN WAX AND HYDROCARBON WAXES – FULLY REFINED AND/OR SEMI REFINED

    Acute Health Effects

    Inhalation: Vapours emitted from molten wax may cause respiratory irritation.

    Skin: Direct contact with molten material may cause thermal burns.

    Eye: Direct contact with molten material may cause thermal burns. Vapors from molten wax may cause watering of the eyes.

    Ingestion:

    Ingestion of large quantities will produce a laxative effect and may be irritating to the digestive tract.

    Skin Corrosion / Irritation: Based on classification principles, the classification criteria are not met.

    Serious Eye Damage / Irritation: Based on classification principles, the classification criteria are not met.

    Respiratory or Skin Sensitisation: No sensitising effects known.

    Germ Cell Mutagenicity: Based on classification principles, the classification criteria are not met.

    Carcinogenicity: This product does NOT contain any IARC listed chemicals.

    Reproductive Toxicity: Based on classification principles, the classification criteria are not met.

    Specific Target Organ Toxicity (STOT) – Single Exposure: Based on classification principles, the classification criteria are not met.

    Specific Target Organ Toxicity (STOT) – Repeated Exposure: Based on classification principles, the classification criteria are not met.

    Aspiration Hazard: Based on classification principles, the classification criteria are not met.

    Chronic Health Effects: No information available

    Existing Conditions Aggravated by Exposure: No information available

    Additional toxicological information:

    When used and handled according to specifications, the product does not have any harmful effects to our experience and the information provided to us.

    12 . ECOLOGICAL INFORMATION

    Ecotoxicity: No information available

    Aquatic toxicity: No information available

    Persistence and Degradability: No information available

    Bioaccumulative Potential: No information available

    Mobility in Soil: No information available

    13 . DISPOSAL CONSIDERATIONS

    Disposal Methods and Containers: Dispose according to applicable local and state government regulations.

    Special Precautions for Landfill or Incineration:

    Please consult your state Land Waste Management Authority for more information.

    14 . TRANSPORT INFORMATION

    UN Number Not regulated

    IMDG, IATA Void

    Proper Shipping Name Not regulated

    IMDG, IATA Void

    Product Name: PARAFFIN WAX AND HYDROCARBON WAXES – FULLY REFINED AND/OR SEMI REFINED

    Dangerous Goods Class Not regulated

    IMDG Class: Void

    Packing Group: Not regulated

    IMDG, IATA Void

    Marine pollutant: No

    15 . REGULATORY INFORMATION

    Australian Inventory of Chemical Substances:

    8002-74-2 Paraffin waxes and Hydrocarbon waxes

    16 . OTHER INFORMATION

    Abbreviations and acronyms:

    GHS: Globally Harmonized System of Classification and Labelling of Chemicals

    CAS: Chemical Abstracts Service (division of the American Chemical Society)

    LC50: Lethal concentration, 50 percent

    LD50: Lethal dose, 50 percent

    IARC: International Agency for Research on Cancer

    STEL: Short Term Exposure Limit

    TWA: Time Weighted Average

    NES: National Exposure Standard

    download

  • Light grade 10%

    Analysis of slack wax light grade 10% oil content

    Characteristic

    Unit

    Typical

    Test method

    Kinematic viscosity @100 ˚c

    Cst

    5

    Astm d-445

    Flash point

    ˚c

    230

    Astm d-92

    Specific gravity 25 ˚c/25 ˚c

    0.80

    Astm d-190

    Oil content

    %wt

    8-10

    Astm d-721

    Congealing point

    ˚c

    55

    Astm d-937

    Color

    3

    Astm d-1500

    Drop melting point

    ˚c

    57

    Astm d-127

    download

  • heavy grade 12%

    Analysis of slack wax heavy grade 12% oil content

    Characteristic

    Unit

    Typical

    Test method

    Kinematic viscosity @100 ˚c

    Cst

    7

    Astm d-445

    Flash point

    ˚c

    250

    Astm d-92

    Specific gravity 25 ˚c/25 ˚c

    0.820

    Astm d-190

    Oil content

    %wt

    12

    Astm d-721

    Congealing point

    ˚c

    50

    Astm d-937

    Color

    Yellow

    Astm d-1500

    Drop melting point

    ˚c

    50

    Astm d-127

    download

  • Heavy Grade 25%

    Analysis of Slack Wax Heavy Grade 25% Oil Content

    Characteristic

    Unit

    Typical

    Test Method

    Kinematic Viscosity @100 ˚C

    Cst

    8

    Astm D-445

    Flash Point

    ˚C

    265

    Astm D-92

    Specific Gravity 25 ˚C/25 ˚C

    0.855

    Astm D-190

    Oil Content

    %Wt

    25

    Astm D-721

    Congealing Point

    ˚C

    50

    Astm D-937

    Color

    Yellow

    Astm D-1500

    Drop Melting Point

    ˚C

    52

    Astm D-127

    download

  • Light grade 30%

    ANALYSIS OF SLACK WAX LIGHT GRADE 30% OIL CONTENT

    download

Client Origin

Iranian origin

Packing

Used Drums

Product

bright stock slack wax

Final Destination

TURKEY

Reviews

There are no reviews yet.

Be the first to review “bright stock slack wax”