CY-SHIELD

CY-SHIELD is all in one drilling fluid additive designed for companies who are active in drilling oil and gas wells. CY-SHIELD is designed to work in all type of muds such as Water Base Muds (WBM), Oil Base Mud (OBM) and Synthetic Base Mud (SBM). Therefore, it does not matter what would be the Mud type.

SKU: 1772 Category: Dring Fuid Additions

Khavaran Paraffin offers a range of chemical products formulated to reduce the coefficient of friction (COF) of drilling fluids, helping you minimize torque and drag, reduce stuck pipe risk, and increase ROP.

This Lubricant can be used in WBM. SBM and OBM drilling fluids system

Reduces torque, drag and differential sticking potential.

Compatibility with all type of drilling fluids systems (WBM, OBM, SBM)

Advantageous in extended-reach, deviated, and horizontal wells

read more
CY-SHIELD prevents formation damage
CY-SHIELD forms a physical and chemical bond with permeable formations, creating an effective seal to prevent the passage of drilling fluid. By uniquely functioning as both a malleable and solid plugging agent, CY-SHIELD controls fluid loss and seepage, prevents lost circulation and protects reactive and low-reactive shale surfaces, even at elevated bottom hole temperatures.
HPHT Environment
HP/HT wells, shales and under pressured zones requires specialized drilling fluids and wellbore-strengthening techniques. Adding CY-SHIELD to an OBM, SBM or WBM strengthens the well by:

Reducing pore pressure transmission and sealing micro-fractures in shale and low-porosity sands

Keeping interbedding formations intact

Developing effective filter cake

Providing a “smear effect” that creates a continuous protective sealant along the wellbore wall

CY-SHIELD is all in one drilling fluid additive designed for companies who are active in drilling oil and gas wells. CY-SHIELD is designed to work in all type of muds such as Water Base Muds (WBM), Oil Base Mud (OBM) and Synthetic Base Mud (SBM). Therefore, it does not matter what would be the Mud type.
Evaluation of CY-SHIELD According to Lubricity Test

Why CY-Shield

CY-SHIELD is the only drilling fluid additive that provides all of these benefits:

Controls fluid loss and seepage
Stabilizes shales
Prevents lost circulation
Strengthens the wellbore to increase wellbore stability
Minimizes differential sticking
Promotes effective filter cake development
Performs in oil- and water-based drilling muds
Performs in HP/HT environments
Increase lubricity
Minimizes HSE risks

CY-SHIELD prevents formation damage
CY-SHIELD forms a physical and chemical bond with permeable formations, creating an effective seal to prevent the passage of drilling fluid. By uniquely functioning as both a malleable and solid plugging agent, CY-SHIELD controls fluid loss and seepage, prevents lost circulation and protects reactive and low-reactive shale surfaces, even at elevated bottom hole temperatures.
HPHT Environment
HP/HT wells, shales and under pressured zones requires specialized drilling fluids and wellbore-strengthening techniques. Adding CY-SHIELD to an OBM, SBM or WBM strengthens the well by:

Reducing pore pressure transmission and sealing micro-fractures in shale and low-porosity sands
Keeping interbedding formations intact
Developing effective filter cake
Providing a “smear effect” that creates a continuous protective sealant along the wellbore wall

Test results conducted by the N.I.O.C and I.R.I.P are stated as below.